With this unsupported configuration, in this situation there is no user feedback on the monitor or in the Integrated Management Log (IML). Address an issue where the SysConfig command from the Embedded UEFI Shell could not be used to configure Secure Boot even when the user had indicated physical presence when entering the Embedded UEFI Shell. Please try again. Addressed an issue where the system would become unresponsive during boot and display a NMI error when configured with an optional PCI Express device supporting older versions of the PCI Express specification. A firmware update of the fibre channel controller might also be required to take full advantage of this feature. Addressed an issue where a system configured for UEFI Boot Mode with multiple GPUs may not be able to properly start the GPUs under the operating system. 4. Addressed an issue where the system may become unresponsive during boot when configured with a HPE Dual microSD device when one of the microSD devices is failed or missing. With previous revisions of the System ROM, the system health LED would not return to GREEN until after a reboot when an unplugged power supply is plugged in. The iSCSI network settings can be configured in the new System Utilities BIOS/Platform Configuration (RBSU) iSCSI Boot Configuration menu, as well as using the HP RESTful API HpiScsiSoftwareInititiator resource type. HP Enterprise (HPE) supports servers, switches, routers, and tape drives. 10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. By default, the system will now only scan for Fibre Channel boot targets that are configured in each adapter. With this revision of the System ROM, the system will properly display a message indicating the error and halt the boot process. The users may optionally change the time format to Local Time which removes the use of the time zone. User guide abstract, embedded applications active health. Drivers may be in development so please check back at a later date or visit the product homepage. This issue also requires an iLO firmware version update to a revision later than 2.4x which will be released later this year. This issue does not affect systems configured in Legacy Boot Mode. Hp Proliant Dl380 Gen9 Firmware Download. HP ProLiant DL380 Gen 9 furnishes a high-performance rack solution. Added a BIOS/Platform Configuration (RBSU) Network Option for VLAN Configuration. Added support for HPE 128GB SmartMemory Load Reduced DIMMs (LRDIMMs). Addressed an issue where the Intel NIC DMA Channels (IOAT) option could not be properly be configured from the Embedded UEFI Shell via the Sysconfig command. Updated the HP RESTful API HP BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. Previously, a server reset may have been needed to clear the health LED event. Reduced boot time when the Dynamic Smart Array B140i RAID is enabled. After the USB Key is created, you may delete the downloaded file if you wish. Addressed an issue where the system may shutdown when a fatal error occurs in the pre-OS environment (such as the System Utilities or Embedded UEFI Shell) and not log any entry into the Integrated Management Log (IML). Learn more​. The PC you are currently using does not match the PC you have selected. Industry standard SMBIOS tables were NOT updated to reflect Hewlett Packard Enterprise branding. The URL describing the network (HTTP or FTP) location of the startup script can be configured in the System Utilities /Platform Configuration (RBSU), under the Embedded Shell menu. Addressed an issue where the server may become unresponsive when using the PING command from the Embedded UEFI Shell. Addressed an issue where HP Smart Array error messages are not logged to the Integrated Management Log (IML). Added support for Microsoft Windows 2019. Addressed an issue where a system could become unresponsive when booting to Linux Operating when serial output was enabled from the operating system and the iLO Virtual Serial Port was the only enabled UART. Hp proliant dl380 gen9 server user manual. Note: This tool applies to Microsoft Windows PC's only. HP can identify most HP products and recommend possible solutions. Added a Server Security BIOS/Platform Configuration (RBSU) option to Enable or Disable "Processor AES-NI Support". my server is guaranteed and can not download ... there is a padlock ??? Help. QuickSpecs HPE ProLiant DL380 Gen9 Server Standard Features Page 7 RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may This allows for using the Embedded UEFI Shell as a scriptable deployment environment without the need for physical or virtual media (on a bare metal system). The user can now optionally select to use the DUID-LLT as the unique identifier for PXE Boot. Deploy the data center standard Addressed various issues with webclient and ftp commands in the Embedded UEFI Shell. Addressed an issue where the system may become unresponsive and experience a Machine Check Exception or NMI under heavy stress conditions when configured with Intel Xeon E5-2600 v3 processors and 64GB LRDIMMs in a 3 DIMM Per Channel configuration. Added support to automatically initialize the Trusted Platform Modules (TPM) nonvolatile storage when the TPM is first installed on a platform. Search for Service pack for ProLiant. The previous microcode was first introduced in the v2.70 System ROM. The DL380 Gen9 runs P440, P840, B140, H240 series controllers, which doesn't appear on the home page. Wake On LAN does function properly if the system had been shut down from an operating system. Dl380 gen9 server. Addressed an issue where a USB key was still bootable when the USB Boot Functionality was disabled from System Utilities BIOS/Platform Configuration (RBSU). This is the initial version of the firmware. This device can be plugged into the internal USB port on the server to allow a mirrored MicroSD card solution. 0. The boot targets for adapters can be configured using the adapter specific menu in the System Utilities, System Configuration menu, or using management software such as HP Virtual Connect or HP OneView. I have just installed Server 2012 R2 on my HP ProLiant DL380 G5. Addressed an issue with the sysconfig Embedded UEFI Shell command that may cause the system to become unresponsive when using "sysconfig -d get userdefaults all" when the user defaults have not been configured. Finding your Product Number, A [software component] will damage your computer message displays when printing or while installing - Click Here. Addressed an issue where the system may become unresponsive during system boot when a USB-based UPS is attached to the server USB ports. This issue is not unique to HPE servers. Addressed an issue where the system may fail to boot from existing UEFI iSCSI Software Initiator boot options if the user changed the iSCSI Target IP address. A similar issue could be seen with other PCI-express expansion cards implemented with a PCI device behind a PLX PCIe-to-PCI bridge. Pci slots slots, hewlett packard enterprise software. This option is only available in UEFI Boot Mode. This issue would only occur in a pre-operating system environment such as in the UEFI Shell. Added a new System Utilities BIOS/Platform Configuration (RBSU) Fibre Channel/FCoE Scan Policy menu that allows the user to select how the UEFI BIOS will scan for valid Fibre Channel (or boot from SAN) boot targets. English. The Boot from ISO support is currently limited to operating systems that have a self contained OS image (such as WinPE, mini Linux, or VMware ESX installer). Addressed an issue where the system may fail to boot a Linux Operating System when using serial console redirection when the physical Serial Port is disabled and the iLO Virtual Serial Port is enabled. Upgrade Requirement:Critical - HPE requires users update to this version immediately. Addressed an issue where the system health LED would remain blinking RED (indicating a failed state) due to a power supply failure after the power supply had been replaced. The boot to the SPP USB key and maybe select the interactive method so I can see what it tries to do.  Additional information is available from Intel’s Security Exploit Newsroom, https://newsroom.intel.com/press-kits/security-exploits-intel-products/. HPE OneView is your infrastructure automation engine, built with software defined intelligence and a unified API, that when combined with HPE OneView Global Dashboard software, gives you the ability to both manage and update all your HPE servers, storage and fabric across a single user interface. Addressed an issue where Processor Core Disable may not function properly, such as disabling the wrong number of cores, when Intel Xeon E5 v4 processors are installed in the system. Added support to allow for the ROM Based Setup Utility (RBSU) Power Regulator setting to be set to Static Low or OS Control Mode when the Processor Power and Utilization Support was disabled. They are usually only set in response to actions made by you which amount to a request for services, such as setting your privacy preferences, logging in or filling in forms. HP PROLIANT DL380 GEN9 CHIPSET DRIVERS WINDOWS 7 (2020). The iLO GUI will now report the DIMM's status as degraded. Known Issues: Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models. Addressed an issue where systems configured Intel Xeon E5-2600 v4 processors and 64GB LRDIMMs may experience a Machine Check Exception or NMI event when under heavy stress. Addressed an issue that might result in the BIOS Console Redirection support using the Virtual Serial Port to become non-functional. This issue only impacted a system when configured for legacy boot mode. Previous revisions of the System ROM defaulted to scanning all targets.   In the past, the system would scan for all Fibre Channel or FCoE available targets, potentially resulting in long boot times and large number of entries in the UEFI Boot Order list. 1. Addressed an issue in reporting the incorrect PCIe slot number in the error messages of failed iSCSI boot attempts. Reliability, serviceability and near continuous availability, backed by a comprehensive warranty, make it ideal for any environment. Once the power supply is plugged in, the system health LED should have returned to the blinking GREEN state. We apologize for this inconvenience and are addressing the issue. Addressed an issue that resulted in incorrect association of PCI devices to BIOS Attributes in the HpBiosMappings resource of the HP RESTful Interface. Addressed an issue where a system configured for Legacy Boot Mode may become unresponsive during boot and display a NMI error when the Virtual Install Disk is enabled. After deploying BIOS P89 v2.40 (02/17/2017) and/or ILO Firmware 2.50 (09/23/2016) an HP DL380 Gen9 Server stops during early BIOS boot sequence at the following message: “Starting drivers. Note that the Integrated Lights-Out (iLO) Firmware had a similar issue. Detection completed. Attempting to boot from the Generic USB Boot entry will result in attempting all UEFI bootable USB devices that are available in the system. The proloants are are actual by firmware. Added support for an FTP command in the Embedded UEFI Shell. Added support for loading the Embedded UEFI Shell Auto-Startup script from the network in addition to physical/virtual media. To ensure the integrity of your download, HPE recommends verifying your results with Added a new System Utilities BIOS/Platform Configuration (RBSU) NUMA Group Size Optimizations menu that allows the user to select how the platform will report processor grouping to the operating system. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. Skip the confusion of sorting through all of our drivers and let us detect only the ones you need. This command can be used to configure the server through the HP RESTful services. This change only prevents the display of the erroneous message and does not impact USB functionality. Hewlett packard enterprise. This issue does not affect systems configured in Legacy Boot Mode. Hp proliant dl380 … Addressed an issue where a server might not be able to properly boot Windows Server 2008 R2 when configured with an Optional Graphics Card or GPGPU. This new option is applicable only in UEFI Boot Mode and might be configured from the HP RESTful API or the System Utilities BIOS/Platform Configuration (RBSU). A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. Enhanced the RamDisk command in the Embedded UEFI Shell to support FAT32 RAM disks, increasing the disk size limit from 512 MB to 2GB. From that drive and directory, execute the downloaded SoftPaq file: Simply double click on the SPxxxxx.exe file and follow the installation wizard to complete the SoftPaq installation process. HPE provides customized ESXi Images that allow you to install ESXi on HPE ProLiant Servers. Increased timeout values in Embedded UEFI Shell IfConfig command to reduce the chances of network DHCP configuration failing due to timeouts caused by delays on the network or slow response when trying to contact the DHCP server. Give it a try on your PC! The network settings (DHCP or static IP) and boot file URL can be configured in the new System Utilities BIOS/Platform Configuration (RBSU) Pre-Boot Network settings menu. Added support for additional Storage Options to BIOS/Platform Configuration (RBSU). These cookies are necessary for the website to function and cannot be switched off in our systems. Added support to Standard Format Output (SFO) to the SysConfig command in the Embedded UEFI Shell. Added support for a new ahsdownload command in the Embedded UEFI Shell. For general questions, email us at hpestore.quote-request@hpe.com Here are the drivers available for your system. Here is the List, Click or run in your browser window to install, Let us detect the drivers you need for this HP PC, Our automated tool will simplify the choices you have to make. Addressed an issue where the UEFI iSCSI Software Initiator boot options may become invalid if the DHCP server provides a new IP Address to a previously configured iSCSI boot option. Enter the Product Name Like DL380 Gen9 in this case and select the Exact Model. HPE ProLiant DL380 Gen9 Server: Access product support documents and manuals, download drivers by operating environment, and view product support videos and forum discussions. First, install HP Support Solution Framework. This revision of the System ROM contains updated support for Windows 2019 when using the optional HPE TPM Module. Addressed an issue with incorrect system time in Microsoft Windows operating systems when booted in Legacy BIOS Boot Mode. Upgrade Requirement:Recommended - HPE recommends users update to this version at their earliest convenience. For systems configured with the optional TPM 2.0 device, this is the minimum revision of the System ROM required to update TPM firmware. EFI v2.40 HP . Addressed an issue where the system would not reset configuration settings to defaults when using the Embedded UEFI Shell Sysconfig -d command. This issue does not impact servers with memory configured on multiple processors. Now we want to install them as a Win 2008 R2 server, but we cannot create a NIC teaming. Obtain a formatted USB Key media. This will allow an optional PCIe USB controller, such as available on the Teradici PCoIP Zero Client card, to be functional in a pre-boot environment. Added a new System Utilities BIOS/Platform Configuration (RBSU) IPv6 DHCP Unique Identifier menu that allows the user to select how the UEFI BIOS will use the DHCP Unique Identifier (DUID) for IPv6 PXE Boot. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors. Enhanced the UEFI Exception handler to provide extended debug and trace information when in a pre-OS environment. The user can still control the priority of the boot entries of individual USB devices in the UEFI Boot Order list. HP ProLiant DL380 Gen 9 enterprise servers set the standard for data centers in virtually any work environment. Addressed an issue where the Administrator Password and Power-On Password were incorrectly allowed to be entered with a length of 32 characters with previous revisions of the System ROM. We were unable to find drivers for your product. Addressed an issue where the system may fail to boot from UEFI iSCSI Software Initiator boot options that has iSCSI Initiator or Target configured using static IPv6 addresses. Enhancements: This issue does not impact systems configured with other memory configuration including 64GB LRDIMM with less than 3 DIMMs Per Channel. Gen9 ISO will have files related to Gen9 and previous versions. HPE ProLiant DL360/DL380 Gen9 System ROM - P89 Â. Addressed an issue where an HP Smart Array controller installed in a PCI Express Slot attached to Processor 2 may not be visible on the first boot after the server experiences an unexpected shutdown that requires using the HP Smart Storage Battery to backup storage data. 2 Notifications. Get advice, answers, and solutions when you need them. Added support for Intel Xeon E5-2600 v4 series processors. HP USB Flash Drive . This issue does not impact systems configured for UEFI Boot Mode. Updated the system thermal logic to support the NIVIDIA P4000 GPGPU. The HPE ProLiant DL380 Gen9 Server delivers the best performance and expandability in the Hewlett Packard Enterprise 2P rack. The change also removes the System Utilities BIOS/Platform Configuration (RBSU) option for ACPI RTC Support.